Neons yet again

So I finally did it, I installed some real neons.

For around 40 dollars I did this whole install in my garage.

I start with (3) green neon strands (like I used for my rear signal) and some wires and switches.

The cool part about this setup is that I can control all my auxiliary lights with the flick of a switch setup to run a expansion block I have setup under my seat. The expasion block allows me to add up to three items at once incoporating the positive and ground in the same exspansion block.

(I will provide some details about the setup later in my blog).

So to top pic is in the garage the day I finished the setup from the right hand side. As you can see, before I remove the air intake box and do my intake mod the air intake plenum hides much of the light.

However the left side (second picture down) has much more light coming from it.

Man this thing is bright!

It will light up my garage at night when I took these pictures.

The lower two photos are from the first ride I took after the install.

Of course we all have to show off what we just finished right? Of course. So the night before I finished everything and then went for a ride the following night.

Once it gets really dark these babies really start to shine.

I decieded to leave my other blue ones installed as the green ones did not get in the way at all.

Install was easy as I zip tied them to the frame in various locations so that I could removed them and play with locations if I choose too. Plus tucked under the tank, you never know they exist in the day time.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02

Neons replacement

I originally had these neons around my engine. They were taken off a car modification I did and didn't like on the car. So I re-used them for the engine on the motorcycle for some ambient lighting.

The only problem is how bright they are, not very. So recently I moved them down to the lower frame to light the road under the bike at night. They seem to be pretty bright in the garage (which the camera does not show very well) and so I hope they look good on the road as well.

So in the dark garage they look good.

What I did was the neons came with their own hook ups to the positive terminal on the battery, so I mounted straight to the battery. Then the wire to the switch as an interupt so when the switch is off no power, on power and so fourth. The switch is an easy interupt for this use. I ran the wiring for the switch to the battery, ground and then to the neon positive. Finally placed the wiring under all the stuff under the seat and down on the frame wall, as seen in last photo. Then ran the neon power lines down the other side between the battery and the frame.

At the lowest section nearest the motor I placed some heat covering to protect the wiring before it reached the lower frame. Then I ziptied the neon strand to the frame.

It's really cheap and simple but gets the job done until I can get some more lights on the motor and other key places.

The switch I got was perfect with a screw on attachment base for use if you would drill a hole in something, but I didn't need all that.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!
Please leave a comment,

I appreciate them!

Colby Butler aka Kingkole02

Just a little touch up

I wanted some additional flair on my motorcycle so for $4, I managed with these to match my rear. Now I can fly a flag everyday I ride.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02

Bag Bars

I recently have been working on some projects and just completed my bars for hang the bags better. The stores charge up to 130 for these which I did for under 20.

Wrapped in electrical tape to prevent damage to my bags.

Below here are my crude original designs which didn't work out so well as you can see.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02

New headlights and signals

I recently added some new high output driving lights to my motorcycles arsenal of headlights. These are great and really bright. They light up the road directly in front and to the sides. They don't shine as far as the standard beams, but what did I expect from a $25 set?

They help a lot a night and can be used in coordination with the high beam during the day so I can save my passing lights for when I need them.

I got this really great idea one day to add some turn signals to my motorcycle. Previously I had installed some Hayabusa signals from a friend and simply wire tied them to the triple bar. While these worked, I didn't really like the look. So I stumble upon more lights from a company I have ordered from before, http://www.superbrighleds.com/.

While I had some issues with the shipment and wrong color being selected, we managed to work out the details and I installed these LEDS.
They come with positives and negatives.

Once I started this process I realised these aren't the brightest in the world, however they are in a more visible place than the old ones. So now I have a dilemma to add another set of them to a location. However, they draw so little power, that my signals register as if a light is out and flash faster than normal, drawing more attention to the signals. So I figure for what I paid for them, I could order another pair or two and hopefully add more of them.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02

New Gloves!

New Gloves are here!

I wore out my old pair after 4000k miles or riding and purchased a new pair from my favorite apparel website http://www.leatherup.com/.

Here is the link to the gloves https://www.leatherup.com/site/product?pid=51538

These gloves are very nice and offer the comfort which my old gloves did but with more protection and looks. Plus they have some cold wind channels which help with the hot summers here in Florida, or at least I hope to find out soon.

It was 81 today and they did a good job of keeping my hands cool today.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02

Helmet Locks

My old lock gave out, so I came across a special via the internet and order two of these chrome keyed locks. Very cool indeed! Best places to mount them I have found too. I can now lock two helmets on my motorcycle without having to lift the saddle bag to do so.

I mounted one dead center of the handle bars and the other off the right handle bar. This keeps the helmet from resting on anything hot and provides support from the bars at center. Works well with a half helmet at the center and a three-quarter on the right hand side.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02

Added an extra tailight.

Well so I have been riding around alot, mostly to go to work recently and I came across a website superbrightleds.com. I looked over what they offer, pretty neat stuff, than I started thinking "What could I do with all these choices?". So I went ahead and ordered some stuff, with the intentions on expanding my ideas and what not.

So I played around with some idea and ended up with this.It's a nine inch long LED light which I tapped into my brake light wiring so when I brake, I now have a light at the top of my sissy bar. This makes for much better viewing cababilities a night and during the day. Most motorcycles tailight are too low and people can't seem them, or they are not bright enough. There are many after market kits which will change the turnsignals from just signals to running and brake light, with turnsignal abilities out there on the market, except these kits are very exspensive. My solution with under 15.

As you can see that this light is very bright and stands out quite well from a distance too.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02

Took a trip to the Springs

This time of the year it is hard to find good riding days for us southerners who aren't used to the cold. Living in south Florida for a number of years I have become used to the hotter weather and typically warm is our coldest setting.

So I decide to take a trip to a local natural spring and see what it was like.

The ride was very nice and lots of colorful trees to view while riding.

The spring was incredibly almost crystal clear almost until the bottom turned to seaweed and underwater plants.

From the observation deck you could see the spring supply bubbles from beneath.

There were also many nice places to go hiking if you choose to and trail which lead out into another natural spring, but not as big as the primary spring. This spring location offers all kinds of enjoy if you choose to stay over night at the hotel, or swim in the springs, or maybe take a glass bottom boat ride to view the spring from under the water.

It was all a lot of fun and such a very nice day to do so.

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02

It's been a long time once again!

Hi All,
I have taken a long absence with the great changes taking place. However I just realised I didn't post any pictures of MY motorcycle. That's right, MY motorcycle. I purchased a used V-Star 1100 classic cruiser with all the extras I wanted.
Enjoy!!

More Photos from my trips click Here!

You can subscribe to my posts by clicking here SUBSCRIBE!

Please leave a comment, I appreciate them!

Colby Butler aka Kingkole02